Bayrol Soft & Easy Chlorine-Free Pool Treatment for 20 m³ - 4.48 kg Bucket - 1199201

Technical specifications of the Bayrol Soft & Easy treatment for 20 m³

The Bayrol Soft & Easy system (item number 1199201 ) is a combination of active oxygen-based oxidizing granules, algaecide, and clarifier, designed for the regular maintenance of private swimming pools.

Its packaging in pre-measured double-pouches greatly simplifies technical handling and prevents any direct contact with the active ingredients.

• Brand: BAYROL.

• Product name: Soft & Easy (ohne Chlor / sans chlore / senza cloro).

• Manufacturer Reference: 1199201 (3648).

• Net weight: 4.48 kg.

• Product type: Biocide, TP02 algaecide (granules).

• Intended use: Pools 15 m³ and larger (1 bag per 20 m³).

• Compatible filter type: All filter types. .

• Application location: Directly in the water, in front of the return nozzles. .

• Application frequency: Weekly.

• EAN code: 4008367992019. .

• UFI: C1C1-70D0-F001-3SR2.

Detailed chemical composition (Comp. 1 & Comp. 2)

This product is a combination of two active ingredients that work in complete synergy to purify your pond water.

Component 1 (Oxidizing Packet): Contains Pentapotassium-bis(peroxymonosulfate)-bis(sulfate) (1 g/g) CAS No. 70693-62-8, aluminum sulfate decahydrate (CAS No. 16828-12-9), and N-methylmethanamine polymer with (chloromethyl)oxirane (60 mg/g) CAS No. 25988-97-0.

Component 2 (Algaecide & Clarifier Packet): Contains pentapotassium bis(peroxymonosulfate)bis(sulfate) (1 g/g) CAS No. 70693-62-8 and N-methylmethanamine polymer with (chloromethyl)oxirane (60 mg/g) CAS No. 25988-97-0. .

Directions for Use and Dosage Instructions

To ensure your pool is thoroughly disinfected and to guarantee successful treatment, carefully follow the procedure below:

• Step 1 (pH Check): Before dosing, measure the water’s pH using test strips or the BAYROL Pooltester. . Adjust if necessary to ensure it remains strictly between 7.0 and 7.4. .

• Step 2 (Start-up / First Dosage): At start-up or when beginning treatment, add 2 double-sachets of Soft & Easy for every 20 m³ of water.

• Step 3 (Application): Open both compartments of the packet at the indicated point with scissors and pour the entire contents directly into the pool, right in front of the return jets while the filtration system is running.

• Step 4 (Regular Weekly Treatment): Add 1 double-sachet of Soft & Easy per 20 m³ of water each week. It is strongly recommended to perform this step in the evening after swimming.

• Step 5 (Oxygen Check): One to two hours after treatment, measure the active oxygen level with your Pooltester. If the value is below 8 mg/L, add an additional double-pack.

Precautions and Safety Guidelines

This concentrated chemical meets strict safety standards to protect the user and the equipment:

• Hazards: Causes severe skin burns and serious eye damage. . Harmful if swallowed or inhaled. . Very toxic to aquatic life with long-lasting adverse effects. .

• Required protectiveequipment: Wear protective gloves, protective clothing, and eye and face protection when handling.

• Storage instructions: Close the bucket lid tightly after each use to protect the product from moisture. . Do not store pouches outside the original bucket and do not keep opened pouches. .

• In case of contact: Rinse thoroughly with clean water for several minutes. . Call a poison control center or a doctor immediately. .