AQUAPRIMO SALT electrolyser - 65m³ images
AQUAPRIMO SALT electrolyzer - 65m³ - France
Description
AquaPrimo Salt is a compact, affordable electrolyzer for family pools up to 65 m3.
The aim is to automate salt disinfection with immediate ease-of-use, low investment and simple installation on Ø50 hydraulics. Technical data & performance: 3 versions 25, 45 and 65 m3, production setting 0 to 10, Ø50 cell with self-cleaning by polarity inversion from 2 to 16 h in memory, 24 h Boost mode, minimum salt level 2.5 g/L with 5 g/L recommended at the start of the season, low water/low salt/cell fault alarms, shutter or zero flow input, optional flowswitch, 2-digit LED display with 2-key keypad, 230 VAC 50 Hz power supply.
Control, installation & maintenance: the Ø50 transparent vessel and fittings supplied simplify installation. Maintenance focuses on actual flow rate, salinity, visual condition of PICO cell, correct triggering of alarms and verification of flow sensor if added as an option.
2. Installer benefits
Simple offer for small ponds.
Quick Ø50 installation.
Easy-to-explain minimal interface.
Boost and shutter input integrated.
Optional flowswitch.
Salt/hardness analysis kit supplied.
Economical solution for residential use.
3. User benefits
Automated disinfection.
Intuitive operation.
Small footprint.
Simple catch-up via Boost.
Suitable for small ponds.
4. Installer's checklist
1. Choose 25, 45 or 65 m3 version.
2. Check power supply and protection: [To be completed Not published by Hydralians].
3. Install Ø50 transparent vessel, PICO cell and fittings the right way round.
4. Check basin salinity, filtration flow rate and, if fitted, shutter input or optional flowswitch.
5. Set self-cleaning from 2 to 16 h.
6. Test low water, low salt and cell fault alarms.
Checklist settings / commissioning
Set initial production to an intermediate value, then correct from 0 to 10 depending on the season.
Use Boost 24 h for catch-up only.
Check that the pool remains above 2.5 g/L salt, ideally close to 5 g/L at start-up.
If a flowswitch is installed, confirm that it is switched off before restarting.
5. FAQ
For which volume? 25 to 65 m3 depending on version.
Which display? 2-digit LED.
Minimum salt level? 2.5 g/L, 5 g/L recommended initially.
Is the flowswitch included? No, optional.
Is Boost integrated? Yes.
What to monitor? Flow, salt, cell status and alarms.
6. Tips from the field and common mistakes
Tips from the field: for small ponds, the right setting depends mainly on filtration time and actual flow rate, not on maximum production.
Common mistakes: starting with too low a salt level, forgetting the shutter input, undersizing the version or neglecting to check actual flow rate.
