Automatic pool water level regulator to seal in AstralPool 4402060000
A perfect water level, effortlessly
The regulator that tops up your pool for you, even while you are away.
The AstralPool water level regulator automatically keeps your pool at the right level.
Connected to the mains water supply, its adjustable float opens and closes the water inlet on the communicating-vessels principle: as soon as the level drops through evaporation, splashing or bathing, the top-up happens on its own.
This protects your pump and filtration from losing prime when the level gets too low and keeps the skimmer working efficiently.
Made of UV-treated ABS, it is designed to be sealed into the wall and to last.
Our team's tip: connect the 3/8" inlet to a water supply fitted with a shut-off valve, so you can isolate the regulator for winterising or servicing without draining the circuit.
Description
Why fit a level regulator?
A pool naturally loses water every day: evaporation, splashing, water carried off by bathers.
When the level falls below the skimmer, skimming becomes ineffective and the pump may lose prime or even run dry.
The AstralPool level regulator continuously restores the correct level using mains water, with no action from you.
Simple, self-contained operation
At the heart of the regulator is an adjustable float linked to a water inlet valve.
When the water drops, the float lowers and opens the inlet; once the level is restored, it rises and shuts the water off.
No electronics and no power supply: everything works on the mechanical communicating-vessels principle.
Technical features
- Automatic regulation of the pool water level
- Fed from the mains, 3/8" threaded water inlet
- Adjustable float (communicating-vessels principle)
- 2 x Ø 50 mm glue connections: one side, one bottom
- Square cover
- Material: UV-treated ABS, to be sealed in
- Brand: AstralPool (Fluidra) - reference 4402060000
Installation
The regulator is sealed into the pool wall at the waterline.
Its two Ø 50 mm connections are glued to the circuit; the 3/8" inlet connects to the water supply.
Provide access to mains water and, ideally, a shut-off valve upstream.