POOLSTYLE 4-Way Sand Filter Valve for Swimming Pools images
POOLSTYLE 4-Way Sand Filter Valve for Swimming Pools
Replacement 4-way valve for Poolstyle sand filter (6 m³/h)
Replace the multi-port valve in your Poolstyle filtration system with this genuine replacement part, rated for a flow rate of 6 m³/h. This valve controls water flow through your sand filtration system.
Poolstyle-specific replacement part; not compatible with valves or filter heads from other brands. Manufacturer part number 88281105B (ref. EMX-060-0007).
Important: The filter manifold must be installed in a sheltered location. A valve exposed to the elements is not covered by the warranty.
Description
An Original 4-Way Valve for Your Poolstyle Filtration System
In a sand filtration system, the multi-way valve is the central component: it directs water flow between the pump, the filter, and the pool circuit. This Poolstyle 4-way valve is the original replacement part for Poolstyle 6 m³/h filtration units.
By choosing the genuine part, you maintain your filtration unit’s original performance, without any DIY modifications or uncertain adaptations.
Part Numbers and Compatibility
This valve is a Poolstyle-specific part. It is not compatible with units or filters from other brands: check your equipment before ordering.
ℹ️ Good to Know
- Brand: Poolstyle
- Manufacturer Part Number: 88281105B
- Part number: EMX-060-0007
- Filter unit flow rate: 6 m³/h
- EAN code: 3661145021656
- Compatibility: Poolstyle filtration units only
Installation in a sheltered area: warranty condition
The filter unit is not designed to be left in direct sunlight or exposed to rain. Prolonged exposure to UV rays, heat, and the elements weakens the valve body and its seals, particularly around the adjustment handle.
The filter assembly must be sheltered. If the valve is exposed to the elements, the warranty will be void.
⭐ Tip from the team
Always install your filtration system under a ventilated shelter (utility room, filtration enclosure, dedicated shelter). This protects the valve from UV rays, rain, and freezing temperatures, and significantly extends its service life.
❓ Frequently Asked Questions
Is this valve compatible with a filter from another brand?
No. This is a Poolstyle-specific part that is not compatible with filter heads or filters from other brands.
What flow rate is it designed for?
It is designed for Poolstyle filtration systems with a flow rate of 6 m³/h.
Can I install my filtration system in direct sunlight?
No. The filter head must be sheltered. A valve exposed to the elements is not covered under warranty.
How can I be sure I’m ordering the right part?
Check the manufacturer’s part number 88281105B (EAN 3661145021656) and make sure your filtration system is a Poolstyle brand.
-
Brand
-
ReferenceSC-EMX-060-0007
-
In stock5 Items
-
EAN133661145021656
-
ColorBlack
-
Compatible brandPOOLSTYLE
-
Main materialPlastic
