90° PVC pressure tee, Ø 25 mm, for gluing 3-way female fitting for rigid tubing

A T-fitting to split a water line into two

The equal T-fitting is the fitting to use whenever you need to split a water flow into two directions or add an outlet to an existing pipe.
Its three sockets have the same diameter: 25 mm.

Specifications

• Type: 90° equal tee (3-way)
• Connection: 3 female sockets for gluing
• Diameter: Ø 25 mm (for pipe with an outer diameter of 25 mm)
• Material: Pressure-rated PVC
• Sold individually

Examples of use

• Create an additional outlet on a PVC irrigation system
• Add a branch to a swimming pool system (bypass, sample tap, drain)
• Install a rigid PVC water system: pond, tank, water collection

How to successfully bond PVC

1. Cut the pipe at a right angle and deburr it.
2. Clean the pipe and the inside of the socket with a PVC cleaner.
3. Apply PVC pressure-sensitive adhesive to both surfaces.
4. Push the fitting all the way in with a firm, straight motion—without twisting—and hold it in place for a few seconds.
5. Allow the adhesive to dry for the time specified by the manufacturer before submerging it in water.

❓ Frequently Asked Questions

Is this tee suitable for flexible tubing?

No, it is designed for rigid PVC pipe with an outer diameter of 25 mm.
For flexible tubing, you’ll need a corrugated coupling or a compression fitting.

Do all three outlets have the same diameter?

Yes, this is an equal tee: all three outlets are 25 mm.
To transition from one diameter to another, use a reducing tee or a reducer.

What kind of adhesive should you use?

A special PVC pressure adhesive, applied after using a PVC cleaner, to ensure a strong and watertight bond.