450 ml spa leak detector images
450 ml spa leak detector
Price:
€17.99
Tax included
Spa Leak Sealer is highly concentrated, which allows it to seal small leaks from the shell or plumbing of spas and other hot tubs, whether they are acrylic or concrete
Description
- INSTRUCTIONS FOR USE
- 1. Remove the filter cartridges or, for sand filters, select the BYPASS option before adding the product.
- 2. With the pump running, add the required amount of Spa Leak Sealer (see recommended dosage below) slowly into the skimmer (or other suction system)
- suction system).
- 3. Spa Leak Sealer is very heavy and will sink to the bottom. The pumps must be run regularly or continuously to keep it in suspension.
- 4. Let the water circulate for at least 3 hours. Then, check the state of the leak. If the leak is not completely repaired, continue to run the pump for an additional
- for an additional 3 hours.
- 5. When the leak is repaired, turn off the pump. The residue will settle to the bottom of the spa, and you can clean it with a spa vacuum.
- 6. Replace the filters and allow the system to circulate for 45 minutes. Then, remove the filters and clean them thoroughly with water to remove any product residue.
- 7. It is recommended that the spa be drained and left empty for at least 48 hours to allow the product to dry and cure.
- NOTE: If the leak is not completely sealed after the first application, which is possible, we recommend a second application.
- DOSE
- Pour 225 ml per 2,000 liters of water.
-
Brand
-
ReferenceLCC-500-0573
-
In stock5 Items
-
EAN135060321101188
-
Manufacturer's referenceLCC-500-0573
-
Poids du produit0.450
8 other products in the same category
Viewed products
- Out-of-Stock
