Replacement peristaltic tube for MP2 dosing pump, black, 18, 20, or 30 l/h - santoprene, Ø 9 mm - RR.005.011 images
Replacement peristaltic tube for MP2 dosing pump, black, 18, 20, or 30 l/h - santoprene, Ø 9 mm - RR.005.011
Replacement peristaltic tube for MP2 dosing pump (18, 20, or 30 l/h)
This Santoprene peristaltic tube (part no. RR.005.011) replaces the worn tube in the MP2 peristaltic head of the black dosing pumps rated at 18, 20, or 30 l/h (Microdos brand), used for the automatic injection of chemicals (pH, chlorine, etc.) into swimming pools.
Diameter 9 mm – total length 18.7 cm – inner length 11.2 cm.
All dimensions are listed: please verify them before ordering. In the event of an ordering error, return shipping is at your expense, and a tube that has been installed or has come into contact with treatment chemicals cannot be returned. Sold individually.
Description
Overview of the Peristaltic Tube
In a peristaltic metering pump, rollers compress the tube with each rotation to push the product toward the injection point. The tube is therefore constantly in use: it is a wear part that must be replaced regularly to maintain consistent metering.
This Santoprene model is designed for the MP2 (and MP3) peristaltic heads of the black pumps rated at 18, 20, or 30 l/h (including the Summer and Speedy Pool T models).
Technical Specifications
- Part Number: RR.005.011
- Material: Santoprene
- Diameter: 9 mm
- Total length: 18.7 cm
- Inner length: 11.2 cm
- Compatibility: MP2/MP3 peristaltic head, black pump 18, 20, or 30 l/h
- Packaging: 1 tube
Uses
- Replacement of the tube in a pH or pool chlorine dosing pump;
- preventive maintenance of the peristaltic head;
- restarting an automatic control system after winter.
ℹ️ Good to Know
The pump’s flow rate depends on the tubing: tubing designed for a different flow rate will not fit. Compare the diameter and length to your current tubing, and check the flow rate listed on your pump. The tubing is a wear part: normal wear and tear from use is not a defect. All dimensions are listed: check them before ordering. In the event of an ordering error, return shipping is at your expense, and a tube that has been installed or has come into contact with treatment products cannot be returned.
⭐ Tip from the team
Turn off the pump’s power supply and rinse the system with clean water before replacing the tube: treatment products are corrosive. Wear gloves and safety goggles.
❓ Frequently Asked Questions
Which pump is this tube compatible with?
On the MP2 (or MP3) peristaltic head of the black dosing pumps rated at 18, 20, or 30 l/h.
What are its dimensions?
Diameter 9 mm, total length 18.7 cm, inner length 11.2 cm.
When should it be replaced?
As soon as the dosing becomes irregular, or if the tube is crushed, split, or hardened. It is a wear part.
Are there other tubes available?
Yes, the tubes vary depending on the pump’s flow rate: check the flow rate indicated on your device.
-
Brand
-
ReferenceRR.005.011
-
In stock13 Items
-
EAN133760311001000
-
Manufacturer's referenceRR.005.011
-
Compatible brandMICRODOS
8 other products in the same category
- Out-of-Stock
Clients also bought
- Out-of-Stock
