2-1/2" (66x76) PVC male threaded pipe for wall penetration and plumbing connections, PN 16 - length 120 mm images
This male-threaded PVC-U pipe with a 2"1/2 (66x76) pitch and BSPP cylindrical gas thread is threaded along its entire length. It is used to create a wall penetration (for a basin, tank, or reservoir) or to connect two fittings with 2"1/2 female threads.
PN 16 – length 120 mm – internal diameter 65.5 mm.
Connection via thread only: the 65.5 mm internal diameter does not correspond to a standard PVC pipe diameter, so a pipe cannot be glued inside.
ACS-certified fitting (Certificate of Sanitary Conformity, water intended for human consumption). Installs with a flat gasket. Sold individually.
The threaded pipe (also called a threaded fitting by plumbing professionals) is a PVC-U fitting with a male thread running its entire length.
It is designed for wall penetrations: the manufacturer specifies installation with a flat gasket. It can also connect two fittings with 2½" (66x76) female threads.
The manufacturer intends its line of PVC-U screw-on fittings forwater supply,irrigation,watering, and swimming pool systems. Examples of uses for the threaded pipe:
ℹ️ Good to know
For wall penetrations, the manufacturer offers a flat gasket (Codital part no. 5006) and a wall-penetration nut (Codital part no. 5015) in the same product line, sold separately. The designation “66x76” corresponds to a 2-1/2" gas thread: make sure the parts to be connected have the same pitch. Connection via thread only: the 65.5 mm internal diameter does not match a standard PVC pipe diameter, so a pipe cannot be glued inside.
⭐ Tip from the team
For screw-on fittings, wrap PTFE (Teflon) tape around the threads in the direction of tightening, then tighten by hand without applying excessive force: PVC cannot withstand excessive tightening.
2-1/2" male thread, also marked 66x76 (BSPP cylindrical gas thread).
Length 120 mm, inner diameter 65.5 mm, weight 169 g.
No. The 65.5 mm inner diameter does not match a standard PVC pipe diameter: this threaded fitting connects exclusively via its male thread to components with a 2-1/2" female thread.
Its nominal pressure is PN 16.
Yes, this model is ACS-certified (Certificate of Sanitary Conformity).
No, the threaded tube is sold separately. The flat gasket and the wall-penetration nut are sold separately.
Yes, the PVC threaded pipe is also available in 1", 1-1/4", 1-1/2", 2", and 3".
